RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
Exploring the Two Types of Assessment Validation
An Overview of Assessment Validation
As discussed before and in previous blogs, validation includes two processes: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.
This article will focus on assessment tool validation.
Conducting Assessment Tool Validation
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
When Assessment Tool Validation Should Be Done
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated
- your new training products get added on scope
- reviewing your course against training product updates
- learning resources are identified by you as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Which Training Products to Validate?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Starting Assessment Tool Validation: What You Need
Study Resources
To conduct assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.
Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Validation Committee
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
Your validation panel, as a group, must possess:
Current vocational competencies and relevant industry skills for the unit being validated
Current knowledge and skills related to vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the next version
Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Assessment Key Principles
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work belongs to the candidate?
Currency – Do the assessment tools correspond to current units of competency and industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:
Walk the Talk
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
nappy change
prepare bottles, feed babies from bottles, and clean equipment
solid foods preparation and feeding babies
respond properly to infant signs and cues
prepare babies for sleep and settle them
monitor and foster physical exploration and gross motor skills appropriate for the age
Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing more info the tasks twice with one baby is not sufficient.
Full or Not Competent
Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What can be included in a work package?
The answer may include:
Necessary resources
Relevant costs
Duration of activities
Assigned functions and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.
Possible answers could include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, engineering controls, administration
Equipment or machinery – isolation, engineering controls, administrative controls
Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.